Automatic gates help from our network in Irving, TX
Irving's median home was built in 1985, according to the Census, so many gate operators, hinges and driveway gates here have been working for decades. If your automatic gate won't open, won't close, or stops and reverses halfway, the cause can be hail or wind damage from a North Texas spring storm, a power surge, worn hardware, or posts that have shifted in expansive clay soil.
USA Home Repairs connects Irving homeowners, HOAs and property managers with independent technicians in the Irving area. Call (888) 996-7488 at any hour. We offer same-day or next-day appointments in most areas, a free estimate before any work starts, and a workmanship guarantee.
Book gates service
We answer around the clock. Tell us your ZIP and what's going on — you'll get the earliest window in Irving and a specialist on the way.
(888) 996-7488Tap to call · 24/7 live answering — call anytime
- Free estimate on every service
- Same-day & next-day appointments
- Workmanship guarantee
Why automatic gate repair is different in Irving
Irving has two kinds of gate situations. Older postwar brick neighborhoods near downtown have driveway and side gates that are now decades old. Las Colinas and Valley Ranch have newer gated entries and community access gates, and these need regular operator service. The Census puts owner-occupied housing at 37.2 percent, so many Irving properties are rented, and repair requests often come from property managers or HOA boards as well as owners. Spring hail, straight-line winds and tornadoes can dent gate panels and damage operators. Summer stretches above 100°F stress motors and backup batteries. North Texas clay moves with wet-dry cycles, which can pull gate posts out of plumb and leave swing and slide gates rubbing, sagging or jamming.
Problems we fix in Irving
- Gate stops or reverses mid-travel
Misaligned or dirty photo-eyes and worn safety sensors can make an operator think something is in the way. Shifting clay soil can knock sensors out of line over time.
- Operator dead after a storm or outage
Lightning and power surges peak from late spring through summer in Texas, and they can damage control boards. Power outages can also leave a gate stuck closed if the battery backup is weak.
- Sagging or dragging swing gate
Wet-dry cycles in Irving's clay can tilt posts and loosen hinges. The gate then drags, binds, or strains the opener.
- Slide gate off its track
Debris, worn rollers or a shifted track can stall a slide gate. Forcing it can strip the drive chain or gears.
- Keypad, intercom or remote not responding
Community entries in Las Colinas and Valley Ranch rely on keypads and call boxes that see daily use. Moisture, heat and surges can take them out.
- Weak battery or failing solar backup
Hard freezes, as in February 2021, can drain batteries. Long 100°F summer stretches can also wear on battery-backed and solar systems.
- Hail or wind damage to gate and operator
Large hail and straight-line winds can bend panels and arms, crack housings and loosen mounts. A gate that looks fine can still have a bent arm or damaged internal parts.
What we do
A technician from our network checks the operator, board, motor and power supply. If the unit is past saving, they will explain replacement in your free estimate.
Hinges, rollers, tracks, arms and latches can be repaired or replaced. Posts that have moved in clay soil can be assessed too.
For a new driveway or community entry, a technician can talk through gate type, operator, and what your HOA or city may need to approve.
Access devices, photo-eyes and ground loops can be diagnosed and replaced so the gate reverses when something is in its path.
Backup power can keep a gate usable through outages. A technician can review battery condition after freezes or summer heat.
Licensing, permits and codes in Texas
Texas has no dedicated automatic gate contractor license, but several rules can still apply. New circuits, wiring and low-voltage power runs for gate operators fall under the Texas Department of Licensing and Regulation (TDLR), and that work must be done by an electrician licensed by TDLR. Installing or servicing access control devices such as keypads, card readers and telephone entry is regulated by the Texas Department of Public Safety Private Security Program, so confirm scope with DPS Private Security and TDLR before hiring anyone. Gate operator safety is governed by UL 325 and ASTM F2200, and the adopted International Fire Code calls for emergency responder access at gated entrances, often through a Knox box or siren/strobe override. Permits may be needed for new operator power or for posts, footings and masonry piers, so verify with the City of Irving building department. HOAs, including those in Las Colinas and Valley Ranch, often require their own approval.
Timing and availability
Gate problems in Irving tend to follow the weather. Spring storm and hail season, March through June, can leave operators and panels damaged. The first hard freeze can strain batteries and hydraulic operators, and summer heat can wear on electronics. Texas lightning and surge damage also peaks from late spring through summer. Call (888) 996-7488 any time, day or night; phones are answered 24/7. We aim for same-day or next-day appointments in most areas, and you get a free estimate before any work begins.
We serve Irving, including Las Colinas, Valley Ranch, Cottonwood Valley, Hackberry Creek, Las Colinas Urban Center, Plymouth Park, the Heritage District, Irving Heights, the Hospital District and the University of Dallas area.
Gates questions in Irving
Why does my Irving gate stop and reverse?
Usually the safety system is sensing an obstruction, or the sensors are misaligned or damaged. Posts that have shifted in North Texas clay can also throw sensors off. A technician can test the photo-eyes and the operator.
Do I need HOA approval for gate work in Las Colinas or Valley Ranch?
HOAs are common in Irving's master-planned north side and often have their own standards for gates and entries. Check your association's rules before replacing or installing a gate. Your technician can describe the work so you can submit it.
Can hail damage a gate operator even if the gate looks fine?
Yes. Hail and wind can bend arms, crack housings or loosen mounts, and storm surges can damage control boards without any visible sign. Irving sits in a hail and severe-storm corridor, so a post-storm check is worthwhile.
Does a new gate in Irving need a permit?
An electrical permit is often required for new operator power, and a building permit may apply to posts, footings or masonry piers. Verify requirements with the City of Irving building department. Fire department approval for emergency access may also be needed for gated drives and communities.
What does the estimate cost?
The estimate is free and comes before any work starts. A technician reviews the problem, explains the options, and you decide whether to go ahead.
Need gates help in Irving today?
Free estimate. Phones answered 24/7. Call for the earliest window in your area.